Unzip the downloaded Voice file(s) using your preferred computer program.

Copy the unzipped folder which contains the Voice file(s) to the root folder of your USB storage device.

Do not rename the files. Do not take the files out of the folder they came in.

Insert the USB Storage Device containing your Voices into the USB port on your instrument.
(located just to the right of the keyboard)

Now, let's load the Voice. If you are loading more than one Voice pack, you will need to repeat the following steps for each pack.

Press VOICE CREATOR on your instrument.
(located under Menu, to the right of the center screen).

Press D. Your instrument will now display the Individual Load screen.

Scroll to your USB device using TAB buttons. Using the menu at the bottom of the instrument screen, COPY all files in the Voice folder.

Scroll to HD using TAB buttons. Using the menu at the bottom of the instrument screen, PASTE the files to the instrument HD.
Please Note: All files in this process must be copied to the same HD directory.

Press EXIT to return to VOICE CREATOR MENU.

Press A. Your instrument will now display the Library Load screen.

Scroll to your USB device using TAB buttons. Using the menu at the bottom of the instrument screen, COPY all files in the Voice folder.

Scroll to HD using TAB buttons. Using the menu at the bottom of the instrument screen, PASTE the files to the instrument HD. If you are asked to overwrite files, select "Yes."

Press DIRECT ACCESS and then EXIT to return to the Home screen.

Press D to enter the styles selection screen.

Scroll to your USB device using TAB buttons. Using the menu at the bottom of the instrument screen, COPY all files in the Voice folder.

Scroll to HD using TAB buttons. Using the menu at the bottom of the instrument screen, PASTE the files to the instrument HD.

Again, press DIRECT ACCESS and then EXIT to return to the Home screen. Repeat this process for the Multipads, Registrations and Songs by pressing the relevant LCD button (E for Multipads, J for Registrations and A for Songs) and copying all files to the same folder on your hard drive.

Once copying is completed, remove the USB stick from the keyboard.

Press VOICE CREATOR on your instrument. (located under Menu, to the right of the center screen).

Press A. Your instrument will now display the Library Load screen.

(If your HD storage device is not displayed, use the TAB buttons to select it.)

Select the desired folder of the Pack or Voice you wish to load by pressing the button next to it one time. (Some unzipping software creates an additional folder, in which case you will need to press two times.)

Press F to load the file.

You'll be taken to the Main screen and see the loading status in the upper left hand corner. It may take a few minutes to complete the loading process.

Connect a USB 2.0 cable between your computer and your instrument. Plug the hexagonal end of the USB 2.0 cable into the "To Host" port on the rear of the instrument and plug the rectangular end into your computer.

Restart your instrument in hard-disk mode by pressing MUSIC FINDER (located just to the right of the instrument's screen) while starting up the instrument. See your instrument's Owner's Manual for details.

Unzip the downloaded Voice file(s) using your preferred computer program.

Open the instrument's hard drive (e.g. "TYROS3_HD") from your computer and copy the unzipped folder containing the Voice file(s) from your computer to the instrument.

Once copying is complete, go to the next step.

Restart the instrument by pressing EXIT.
(located under Menu, to the right of the center screen).

You may now load the Voice.

Now, let's load the Voice. If you are loading more than one Voice pack, you will need to repeat the following steps for each pack.

Press VOICE CREATOR on your instrument.
(located under Menu, to the right of the center screen).

Press A. Your instrument will now display the Library Load screen.

(If your HD storage device is not displayed, use the TAB buttons to select it.)

Select the desired folder of the Pack or Voice you wish to load by pressing the button next to it one time. (Some unzipping software creates an additional folder, in which case you will need to press two times.)

Press F to load the file.

You'll be taken to the Main screen and see the loading status in the upper left hand corner. It may take a few minutes to complete the loading process.

If your purchase includes non-Voice data such as Styles, Registrations, Multi Pads and Songs, access them by selecting the type of file you wish to use and going to the instrument hard drive.